Calculator
Temperature Converter
Convert temperature between Celsius, Fahrenheit, and Kelvin.
Calculator Inputs
Legend
Temperature conversion legend
Values are converted to Celsius internally, then converted to the selected target unit.
Input meaning
- Temperature value: enter the measured, quoted, or hospital-approved value.
- From: select the option that matches the source document, device label, certificate, or installed system.
- To: select the option that matches the source document, device label, certificate, or installed system.
Result interpretation
- Converted values should be rounded to the procedure tolerance.
- Calibration and mapping records must use calibrated instruments, not only conversions.
Assumptions
- Use calibrated thermometers for acceptance testing and compliance records.
- Round according to the required procedure tolerance.
Biomedical use
- Useful for CSSD, laboratory refrigerators/freezers, incubators, water baths, HVAC checks, and maintenance documentation.
How to identify the required values
Use these examples and common working ranges to choose values from gauges, labels, manuals, datasheets, RFQs, service reports, CMMS records, or hospital planning assumptions.
| Field | Example value | Common range | Tip |
|---|---|---|---|
| Temperature value | Sterilizer jacket temperature 134 C. | Enter the source value exactly as shown before selecting the source and target units. | Enter the source value before converting units. |
| From | Fahrenheit from an imported manual. | Select the unit printed on the source document or instrument. | Select the unit printed on the source document. |
| To | Convert to Celsius for biomedical PM records. | Select the unit required in the RFQ, service report, or engineering calculation. | Select the unit required in the output. |
Common ranges are starting points for hospital planning. For final procurement, acceptance testing, electrical design, medical gas design, radiation shielding, dialysis water systems, or clinical use, replace the example values with site-specific data and vendor-confirmed figures.
Input Checklist
Confirm these values before relying on the output for procurement, PM, or service planning.
- Value
- From unit
- To unit
Safety And Engineering Notes
Use calculator outputs as planning estimates and verify critical systems with calibrated measurement or qualified engineering review.
- Use calibrated thermometers for acceptance testing and compliance records.
- Round according to the required procedure tolerance.
Related Calculators
Continue with calculators in the same biomedical planning area so estimates for power, gas, water, imaging, staffing, procurement, or lifecycle cost stay connected.
converter
Pressure Converter
Convert pressure between Pa, kPa, bar, psi, mmHg, and cmH2O.
converter
Flow Converter
Convert flow between L/min, L/s, m3/h, mL/min, and US gpm.
converter
Electrical Unit Converter
Convert common electrical power units used in biomedical and facilities planning, including W, kW, VA, kVA, hp, and BTU/hr.
converter
Medical Gas Unit Converter
Convert common medical gas flow units including L/min, L/s, m3/h, L/day, m3/day, and ft3/min.
Related Equipment Hubs
Related Procurement Resources
Procurement guide
Medical Equipment RFQ Writing Guide: How Hospitals Can Prepare Better Equipment Tenders
A well-written medical equipment RFQ is one of the most important documents in hospital procurement. It helps the hospital receive comparable vendor offers, avoid hidden costs, reduce post-award disputes, and ensure that the supplied equipment is clinically usable, technically compliant, and maintainable throughout its lifecycle.
Procurement guide
Medical Equipment Acceptance Testing Guide: A Complete Hospital Handover and Commissioning Checklist
Medical equipment acceptance testing is one of the most critical steps in the healthcare procurement lifecycle. It serves as the bridge between equipment delivery and clinical operation, ensuring that hospitals receive exactly what was purchased and that the equipment is safe, functional, properly documented, and ready for patient use.